PAUL I HAVEN,T FORGOT YOU ON THE LOCK IN STITCH, I GO THE ADDRESS AND LAID IT ONMY WORKBENCH AND NOW I CAN,T FIND IT , WILL CLEAN THE TABLE TOMORROW AND GET THE ADDRESS AND THE PH NO JERRY

Jerry--

OK, I am in no great hurry. This project will be taking me a long time.

Thanks --

Paul

HEY PAUL GOT THE INFO ON THE CAST IRON REPAIR KITS , LOWER CASE ON THE ADDRESS,

www.LOCKNSTITCH.COM 1-800-736-8261,THIS CO, CAME TO OUR TRAINING CENTER YEARS AGO AND DID A 2 DAY TRAINING SESSION ON THEIR STUFF AND IT IS VERY IMPRESSIVE , THEY ALL SO HAVE SOME OF THE BEST THREAD INSEARTS YOU HAVE EVER SEEN , AND THEY WON,T COME OUT IF INSTALLED CORRECTLY GIVE EM A BUZZ
JERRY THEY ARE IN TURLOCK CA, SO THEY ARE FAIRLY CLOSE .

Jerry--

Gotcha on the LocknStitch. I will check them out. Thanks for the legwork and recommendation.

Paul

HEY PAUL I HAVE TO RECCOMMEND THAT STUFF ,IT IS GREAT, ONCE YOU LEARN TO USE IT CORRECTLY YOU CAN REPAIR A CAST IRON CRACK AND IT IS ABSOLUTELY STRONGER THAN THE PARENT METAL AND ALLMOST IMPOSSIABLE TO TELL IT HAS BEEN REPAIRED , IT IS A LITTLE TIME CONSUMING TO USE THE TOOLS , BUT IS CAN SAVE A TON OF MONEY , I USED TO HAVE A FRIEND CLOSE BY HER WHO REPAIRED A CRACK IN AN OLD MASEEY FERGUSON TRACTOR BLOCK AND IT TOOK HIM ABOUT 4 HRS TO DO THE WHOLE CRACK BUT WHEN HE GOT THRU IT WAS PERFECT , THE BLOCK WAS JUST UNOBTAINALBE AT THE TIME ,, I MENTIONED HE WAS A FRIEND HE PASSED AWAY 3-4 YRS AGO AN AUTOMOTIVE MACHINEST TO END ALL BUT HE LET THE WHISKEY DO HIM IN AT 52 YRS OLD .. JERRY

Jerry--

Way too bad about your machinist friend. Thanks for the testimonial and info on the LocknStitch. I will look into getting a Kit.

Paul