Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: How does the coil install? [Re: n2dp] #710466 03/29/06 07:49 PM
Joined: Mar 2006
Posts: 64
n2dp Offline OP
Getting the Wheeling Fever
I put the new module in and tried to start it. It kinda hit once and now it does sound like it is trying. How about some good directions for timing this thing without any special timing tools?


1988 Raider, 2.6L (Weber carb, PaceSetter header, Centerforce D/F clutch, 5-Speed M/T, 33X12.50 Pro Comp M/T, 15X8 US Wheel 97 Series)
3" Body Lift
Re: How does the coil install? [Re: n2dp] #710467 03/30/06 06:06 AM
Joined: Mar 2006
Posts: 64
n2dp Offline OP
Getting the Wheeling Fever
Got it...after the third try of finding TDC, I finally got it started. Of course the open header made it pretty loud, but it was running pretty good.


1988 Raider, 2.6L (Weber carb, PaceSetter header, Centerforce D/F clutch, 5-Speed M/T, 33X12.50 Pro Comp M/T, 15X8 US Wheel 97 Series)
3" Body Lift
Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5965 MB (Peak: 0.6452 MB) Data Comp: Off Server Time: 2026-06-20 23:00:03 UTC
Valid HTML 5 and Valid CSS