i was given a 86 pup 2.3 4x4 with a blown head gasket. it sat in his yard for about 3years like that. i replaced the gasket, cleaned out fuel tank, cleaned carb, and complete tuneup. the only thing i cant figure out is the fuel pump. its a mech. pump, and all the lines were missing. i tried to research but no complete answers. so i took a chance and guest at it. there are for branches comming from the pump but can only find 3 (inlet, outlet, and return) things to hook up. the one im puzzled over is on the very top of pump. it comes out horizontally then takes a 90deg. bend straight down.
i tried to start truck, no luck. i poured alittle gas down carb, but it spit it all back out at me. i dont know if because of this extra fuel line or if timming is off. im going to check timming this afternoon, and ill let you all know tonight.
i thank you for all the help.
donnie