Wheel stud spinning

Print Thread

Rate Thread

Wheel stud spinning #710534 03/27/06 06:15 PM

Joined: Jan 2006

Posts: 15

scogind

Need a Spot

When I tried to replac the front brake-pads on my 98 Rodeo I noticed that the lug-nuts were extremely tight. I got the right front replaced but the left front had one of the nuts cross threaded and after it backed out about 3/4 to 1-1/2 turns the stud broke free and not just spins. I'm afraid to try the rear ones now. Never be the last new tire customer of the day....

Last edited by mlclark; 03/27/06 09:18 PM.

Entire Thread
Subject	Posted By	Posted
Wheel stud spinning	scogind	03/27/06 06:15 PM
Re: Wheel stud spinning	800XL	03/28/06 12:40 AM
Re: Wheel stud spinning	scogind	03/28/06 10:19 PM
Re: Wheel stud spinning	scogind	03/28/06 10:25 PM
Re: Wheel stud spinning	j03	03/28/06 11:10 PM
Re: Wheel stud spinning	strawmyers	03/29/06 12:51 AM
Re: Wheel stud spinning	barak	03/29/06 01:09 AM
Re: Wheel stud spinning	strawmyers	03/29/06 09:04 PM
Re: Wheel stud spinning	TrooperJ	03/29/06 10:06 PM
Re: Wheel stud spinning	ninety1troop	03/29/06 10:37 PM
Re: Wheel stud spinning	MountaineerIsuzu1	03/30/06 02:46 AM
Re: Wheel stud spinning	MountaineerIsuzu1	03/30/06 02:48 AM
Re: Wheel stud spinning	scogind	03/29/06 04:06 PM
Re: Wheel stud spinning	langforg	03/29/06 05:11 PM
Re: Wheel stud spinning	langforg	03/29/06 05:15 PM
Re: Wheel stud spinning	TrooperJ	03/29/06 07:46 PM
Re: Wheel stud spinning	Troopersphere	03/30/06 04:16 AM
Re: Wheel stud spinning	Troopersphere	03/29/06 12:10 AM
Re: Wheel stud spinning	mlclark	03/30/06 08:59 PM
Re: Wheel stud spinning	lttlbddy	04/03/06 05:11 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: