Oil pick-up tube

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Oil pick-up tube [Re: Kevin C] #711014 03/29/06 06:30 AM

Joined: Feb 2006

Posts: 85

South NJ

Jimbotsi

Getting the Wheeling Fever

I'm also using Wiseco's, 20 overbore. I'll have to dig up the specs on the motor for ya and find the clearances, but I haven't yet fired it up, should be in the next few weeks, currently have a problem with my MSD setup. Damn I have to many projects and not enough time.

87 Monty SWB 208k currently immobile: SOME RUST
89 Quest 61k slightly original
DD---> Integra Rust bucket (gone but not forgotten)
02 BMW M5

Entire Thread
Subject	Posted By	Posted
Oil pick-up tube	Jimbotsi	03/28/06 08:38 PM
Re: Oil pick-up tube	Kevin C	03/28/06 09:07 PM
Re: Oil pick-up tube	Jimbotsi	03/28/06 10:11 PM
Re: Oil pick-up tube	Kevin C	03/28/06 10:23 PM
Re: Oil pick-up tube	Jimbotsi	03/29/06 06:30 AM
Re: Oil pick-up tube	raiderquest	03/29/06 04:22 PM
Re: Oil pick-up tube	Kevin C	03/29/06 04:36 PM
Re: Oil pick-up tube	fasteddy	03/29/06 05:57 PM
Re: Oil pick-up tube	Jimbotsi	03/29/06 06:06 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.561s Queries: 16 (3.559s) Memory: 0.6112 MB (Peak: 0.6441 MB) Data Comp: Off Server Time: 2026-06-22 05:14:13 UTC
Valid HTML 5 and Valid CSS