|
|
 axle vents
#711051
03/29/06 12:06 AM
|
Joined: Aug 2005
Posts: 70
OP
Getting the Wheeling Fever
|
Are those little things sufficeint enought to keep water out my diffs if ran through mud/ water. Inoticed I dont have tubes like on a chevy. I have an 89 toyota pickup.
1989 TOYOTA PICKUP 4"trailmaster, 3" Body Lift 8,000 lb warn winch, q-78 tsl super swampers 
|
|
|
Re: axle vents
[Re: maxxis85]
#711052
03/29/06 12:19 AM
|
Joined: Nov 2000
Posts: 4,192
Toyota Moderator
|
Nice looking truck. You can use the fitting off a Celica intake manifold (PN 90404-51319) as shown in this article .
|
|
|
Re: axle vents
[Re: DirtyHarry]
#711053
03/29/06 02:52 AM
|
Joined: Apr 2004
Posts: 2,010
Body Damage is Cool
|
all 22re's have the same vent on them also. i think its for the pcv valve. im not sure. i usually grab them off motors at the junkyard if i see them.
87 22R PU, 2? body lift, 33? BFG muds, 4.88's, F&R Lock-Rights, Rancho Shocks, EB's Street RV Head w/ 268 Cam, LCE Header, 2" to 2 1/4" exhaust, Flowmaster 50 series, Magnaflow high flow cat, complete Herculined SR5 interior, V6 BB, MC, and calipers.
|
|
|
Re: axle vents
[Re: maxxis85]
#711054
03/29/06 03:36 AM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
Are those little things sufficeint enought to keep water out my diffs if ran through mud/ water. Inoticed I dont have tubes like on a chevy. I have an 89 toyota pickup. No, you need to extend them. If you cannot find the barbs listed below you can use a 1/8" NPT brass barb. The threads are almost the same and the brass is soft enough that the steel housing will cut threads. I screw then in first cutting the threads, then pull them back out and wrap the threads with Teflon tape.
David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA
"Serenity through Sobriety"
|
|
|
Re: axle vents
[Re: OOP'S]
#711055
03/29/06 03:58 AM
|
Joined: Aug 2005
Posts: 70
OP
Getting the Wheeling Fever
|
so just poppin the caps off the stock ones and putting a hose to the bed wouldnt be sufficeint? Oh And is the vent the same for the IFS 7.5" front differential
1989 TOYOTA PICKUP 4"trailmaster, 3" Body Lift 8,000 lb warn winch, q-78 tsl super swampers
|
|
|
Re: axle vents
[Re: maxxis85]
#711056
03/29/06 04:41 AM
|
Joined: Apr 2004
Posts: 2,010
Body Damage is Cool
|
you can use the same barb for the front but it will hit your oil pan. but if you have a suspension lift i dont think it will.
87 22R PU, 2? body lift, 33? BFG muds, 4.88's, F&R Lock-Rights, Rancho Shocks, EB's Street RV Head w/ 268 Cam, LCE Header, 2" to 2 1/4" exhaust, Flowmaster 50 series, Magnaflow high flow cat, complete Herculined SR5 interior, V6 BB, MC, and calipers.
|
|
|
Re: axle vents
[Re: 87Toy4x4]
#711057
03/29/06 04:50 AM
|
Joined: Aug 2005
Posts: 70
OP
Getting the Wheeling Fever
|
So get the nissan vents and run tubes to engine bay will work. Yes i have a sus lift. And the stockers arent an ootion here? Im not trying to be cheap either. Just curious that all, cuz this needs to be done
1989 TOYOTA PICKUP 4"trailmaster, 3" Body Lift 8,000 lb warn winch, q-78 tsl super swampers
|
|
|
Re: axle vents
[Re: maxxis85]
#711058
03/29/06 04:57 AM
|
Joined: Apr 2004
Posts: 2,010
Body Damage is Cool
|
you dont need nissan ones. it would be easier to just go grab some vents off of a 22re. or you can get them from the dealer. i dont have the p/n right now but im sure someone on here does.
87 22R PU, 2? body lift, 33? BFG muds, 4.88's, F&R Lock-Rights, Rancho Shocks, EB's Street RV Head w/ 268 Cam, LCE Header, 2" to 2 1/4" exhaust, Flowmaster 50 series, Magnaflow high flow cat, complete Herculined SR5 interior, V6 BB, MC, and calipers.
|
|
|
Re: axle vents
[Re: 87Toy4x4]
#711059
03/29/06 04:17 PM
|
Joined: Aug 2005
Posts: 70
OP
Getting the Wheeling Fever
|
you dont need nissan ones. it would be easier to just go grab some vents off of a 22re. or you can get them from the dealer. i dont have the p/n right now but im sure someone on here does. What vents are you talking about man. Is it off the motor, and where are they located so i can grab some? Last 22r i seen was my dads 83 hilux and i was a kid that doesnt know what that was
1989 TOYOTA PICKUP 4"trailmaster, 3" Body Lift 8,000 lb warn winch, q-78 tsl super swampers
|
|
|
Re: axle vents
[Re: maxxis85]
#711060
03/29/06 05:33 PM
|
Joined: Jan 2000
Posts: 12,153
Web Wheeler
|
|
|
|
|
|
