|
|
|
|
 3.2L EGR Pipe lengths?
#711246
03/30/06 01:39 AM
|
Joined: Jul 2000
Posts: 782
OP
Rock Warrior
|
Okay, I had bad heads and ended up getting 93-95 Heads for my 97 and had to get new Exhaust Manifolds so they would work. I got the exhaust all hooked up and everything seems to be running fine.
The problem I have is the EGR pipe fits into the intake, but I can only get the nut on the manifold side. The bolt that also goes thru the manifold will not fit.
In comparing the old/new manifolds it seems there is a slight displacement and that might be why i can't get it to fit right.
So the "real" question. Is the EGR pipe a different length from 95 to 97??
-------------
97 Rodeo
01 F250 6spd Lariat
94 F150 Lightning-- 13.3 1/4
|
|
|
Entire Thread
|
3.2L EGR Pipe lengths?
|
Rodeofox
|
03/30/06 01:39 AM
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.467s Queries: 15 (3.465s) Memory: 0.5921 MB (Peak: 0.6251 MB) Data Comp: Off Server Time: 2026-07-15 00:26:54 UTCValid HTML 5 and Valid CSS 
