Coolant leak possibilities

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Coolant leak possibilities [Re: 1987Raider] #711500 03/31/06 05:01 PM

Joined: Mar 2006

Posts: 64

Centerton, AR

n2dp

Getting the Wheeling Fever

Can I just mash a dab of gasket maker into the hole and put the carburetor back together?

I think that one of the adapter plate screws might not be as tight as it should be. A little thread wear. I will see if I can get a heli-coil for it and maybe that will tighten it down a little better.

1988 Raider, 2.6L (Weber carb, PaceSetter header, Centerforce D/F clutch, 5-Speed M/T, 33X12.50 Pro Comp M/T, 15X8 US Wheel 97 Series)
3" Body Lift

Entire Thread
Subject	Posted By	Posted
Coolant leak possibilities	n2dp	03/31/06 03:48 AM
Re: Coolant leak possibilities	CapnCrunch	03/31/06 04:38 AM
Re: Coolant leak possibilities	n2dp	03/31/06 05:00 AM
Re: Coolant leak possibilities	1987Raider	03/31/06 02:27 PM
Re: Coolant leak possibilities	n2dp	03/31/06 05:01 PM
Re: Coolant leak possibilities	n2dp	04/02/06 07:30 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.534s Queries: 16 (3.532s) Memory: 0.6038 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-06-21 09:25:45 UTC
Valid HTML 5 and Valid CSS