best way to adjust rear pinion angle

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: best way to adjust rear pinion angle [Re: 4Crawler] #712168 04/02/06 07:10 PM

Joined: Sep 2002

Posts: 36

Lincoln, Ne

akarocket

Getting the Wheeling Fever

would a 9.5" shackle be too long? That would lift the rear 1" and gain me 2 degrees. What size of shim would be needed to make up the rest? I know it does not change directly because you are raising the driveshaft at the same time.
Thanks

88 4runner SAS 36 IROKS with some stuff

Entire Thread
Subject	Posted By	Posted
best way to adjust rear pinion angle	akarocket	04/02/06 06:55 PM
Re: best way to adjust rear pinion angle	4Crawler	04/02/06 07:01 PM
Re: best way to adjust rear pinion angle	akarocket	04/02/06 07:10 PM
Re: best way to adjust rear pinion angle	4Crawler	04/02/06 07:56 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 7.404s Queries: 16 (3.934s) Memory: 0.5997 MB (Peak: 0.6327 MB) Data Comp: Off Server Time: 2026-06-13 15:08:03 UTC
Valid HTML 5 and Valid CSS