time to replace slave cylinder? what else?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: time to replace slave cylinder? what else? [Re: acy76] #712981 04/07/06 02:11 PM

Joined: Aug 2005

Posts: 111

Northern Va

Don_W

Wheeler

I replaced my slave twice at about 75,000 mile intervals, which isn't too bad, for the third I replaced Master, slave, and all in between. I now bleed it "a lot."

Don
1989 Trooper II 2.6L
222,222

Entire Thread
Subject	Posted By	Posted
time to replace slave cylinder? what else?	mceachrw	04/05/06 03:58 AM
Re: time to replace slave cylinder? what else?	acy76	04/05/06 07:59 PM
Re: time to replace slave cylinder? what else?	acy76	04/07/06 04:54 AM
Re: time to replace slave cylinder? what else?	Don_W	04/07/06 02:11 PM
bad throw out bearing? was time to replace slave cylinder?	mceachrw	04/25/06 03:29 AM
Re: bad throw out bearing? was time to replace slave cylinder?	mceachrw	04/27/06 02:11 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.483s Queries: 16 (3.481s) Memory: 0.6042 MB (Peak: 0.6372 MB) Data Comp: Off Server Time: 2026-06-18 21:30:44 UTC
Valid HTML 5 and Valid CSS