Timing Write Up???

Print Thread

Rate Thread

Re: Timing Write Up??? [Re: eastcoast] #713117 04/06/06 01:55 AM

Joined: Nov 2005

Posts: 24

OneStar

Need a Spot

The bolt is located in the middle of the elongated hole. I believe the meter is correct but I will check it tommorow against another meter. I am starting to think it's a vacuum issue. I wonder how much it would cost to hook it up to one of those smoke machines and see if there are any leaks?

I would still like to know where those damm markings are for timing on the crank pulley.

Entire Thread
Subject	Posted By	Posted
Timing Write Up???	OneStar	04/05/06 04:37 PM
Re: Timing Write Up???	4Crawler	04/05/06 04:56 PM
Re: Timing Write Up???	OneStar	04/05/06 06:10 PM
Re: Timing Write Up???	4Crawler	04/05/06 06:54 PM
Re: Timing Write Up???	Anonymous	04/05/06 06:57 PM
Re: Timing Write Up???	OneStar	04/05/06 07:46 PM
Re: Timing Write Up???	4Crawler	04/05/06 07:57 PM
Re: Timing Write Up???	OneStar	04/05/06 08:12 PM
Re: Timing Write Up???	OneStar	04/05/06 10:49 PM
Re: Timing Write Up???	Anonymous	04/05/06 11:44 PM
Re: Timing Write Up???	OneStar	04/06/06 12:25 AM
Re: Timing Write Up???	eastcoast	04/06/06 01:46 AM
Re: Timing Write Up???	OneStar	04/06/06 01:55 AM
Re: Timing Write Up???	kewlynx	04/06/06 02:22 AM
Re: Timing Write Up???	DRTDEVL	04/06/06 03:07 PM
Re: Timing Write Up???	4Crawler	04/06/06 06:10 PM
Re: Timing Write Up???	Anonymous	04/08/06 07:54 PM
Re: Timing Write Up???	Anonymous	04/08/06 09:27 PM
Re: Timing Write Up???	OneStar	04/09/06 12:04 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: