tranny drain plug size and thread size?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

tranny drain plug size and thread size? #713999 04/08/06 01:45 AM

Joined: Nov 2004

Posts: 47

Washington DC

sidecardog Offline

Getting the Wheeling Fever

Hey there gang.
I managed to strip out the tranny drain plug putting it back in and had to drill it out. Anyone know what the plug size and threat size is for the Gen I V6 tranny? I can tap it out to just about any size but wanted to start as close to the original as possible. Thanks
Matt

2002 Montego Limited, 3.5 V6, 90K, just purchased
1990 Montero LS, LWB, AUTO, 3.0 V6, 250K, 2" SL, 31" tires--SOLD
1959 Vespa VBA150 all original w/sidecar

Entire Thread
Subject	Posted By	Posted
tranny drain plug size and thread size?	sidecardog	04/08/06 01:45 AM
Re: tranny drain plug size and thread size?	LRJ4x4	04/09/06 05:00 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.575s Queries: 15 (3.573s) Memory: 0.5946 MB (Peak: 0.6276 MB) Data Comp: Off Server Time: 2026-06-22 09:30:41 UTC
Valid HTML 5 and Valid CSS