Hey guys, I am in the middle of a little preventative maintenance. I am in the middle of replacing the timing chain on my truck. I have stripped the block down, and now I am having trouble getting the crank bolt to break loose. I wedged a breaker bar in on the drivers side frame rail like the write up in the tech section said and then bumped the starter. Nothing.

If I am going about this wrong please tell me. If anybody has any suggestions, I am wide open.

Oh and while I'm at it, how many bolts hold the AC bracket on. I unbolted the three on the front, is there one on the side that I need to loosen so that it can be moved to the side.

Thanks a ton,

Matt