Flex Plate ... viable substitute for Pressure Plate

Print Thread

Rate Thread

Re: Flex Plate ... viable substitute for Pressure Plate [Re: Indikka] #715612 04/15/06 05:53 PM

Joined: May 2000

Posts: 6,132

Portland OR

Kevin C

Trail Leader

Perhaps it ws just the wrong flex plate was installed? Or that the bushing that the flexplate centers on on the crankshaft is missing?

There are a few small parts needed to mount the flex plate and converter, if your missing one it could cause problems.

Kevin

87 Turbo Intercooled Raider, roller cam, torsen rear diff, LSD front diff, lockup auto with modified converter, V6 brakes, low transfer case gears...

Entire Thread
Subject	Posted By	Posted
Flex Plate ... viable substitute for Pressure Plate	Indikka	04/14/06 07:44 AM
Re: Flex Plate ... viable substitute for Pressure Plate	Anonymous	04/14/06 07:56 AM
Re: Flex Plate ... viable substitute for Pressure Plate	ForcedAir_Montero	04/14/06 07:00 PM
Re: Flex Plate ... viable substitute for Pressure Plate	Indikka	04/14/06 09:12 PM
Re: Flex Plate ... viable substitute for Pressure Plate	Indikka	04/14/06 09:28 PM
Re: Flex Plate ... viable substitute for Pressure Plate	Kevin C	04/14/06 11:06 PM
Re: Flex Plate ... viable substitute for Pressure Plate	ForcedAir_Montero	04/14/06 11:20 PM
Re: Flex Plate ... viable substitute for Pressure Plate	LRJ4x4	04/15/06 12:13 AM
Re: Flex Plate ... viable substitute for Pressure Plate	LRJ4x4	04/15/06 12:15 AM
Re: Flex Plate ... viable substitute for Pressure Plate	Kevin C	04/15/06 01:22 AM
Re: Flex Plate ... viable substitute for Pressure Plate	Indikka	04/15/06 01:52 AM
Re: Flex Plate ... viable substitute for Pressure Plate	Kevin C	04/15/06 05:53 PM
Re: Flex Plate ... viable substitute for Pressure Plate	Boertjie	04/19/06 09:32 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: