engine dies after removing hose to PCV valve (for Seafoam)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Toyota 4Runner, FJ Cruiser & SUV engine dies after removing hose to PCV valve (for Seafoam)

Print Thread

Rate Thread

Re: engine dies after removing hose to PCV valve (for Seafoam) [Re: WatsonMD] #715726 04/15/06 08:30 AM

Joined: Aug 2005

Posts: 36

Albuquerque, NM

chuckles

Getting the Wheeling Fever

you can also raise the rpm of the engine to 1200rpm or so to prevent it from dying when you unplug the PCV.

85 Runner. (Camo Beast)

Entire Thread
Subject	Posted By	Posted
engine dies after removing hose to PCV valve (for Seafoam)	Jeff the marmot	04/14/06 11:26 PM
Re: engine dies after removing hose to PCV valve (for Seafoam)	WatsonMD	04/15/06 12:00 AM
Re: engine dies after removing hose to PCV valve (for Seafoam)	chuckles	04/15/06 08:30 AM
Re: engine dies after removing hose to PCV valve (for Seafoam)	Dandeman	04/15/06 07:41 PM
Re: engine dies after removing hose to PCV valve (for Seafoam)	Jeff B	04/17/06 08:45 AM
Re: engine dies after removing hose to PCV valve (for Seafoam)	Anonymous	04/18/06 04:48 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.544s Queries: 16 (3.542s) Memory: 0.6029 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-24 14:37:18 UTC
Valid HTML 5 and Valid CSS