|
|
|
|
 Help with rear shackle install please!!
#715858
04/15/06 06:32 PM
|
Joined: Dec 2003
Posts: 14
OP
Need a Spot
|
I'm working on intalling rear lift shackles on my 89 excab 4x4 and having a very tough time getting the shackle bolts to break free from the spring-eye bushings so that I can remove the old shackles. Any tips? I've hit it, pried it, heated it. Am I going to have to cut these things off?? Any help would be great. Thanks!
89 xcab 4x4 22re. 1.5" BJ spacers, 3" shackle and AAL + fender trim. 33x12.5 R15 MT/Rs, 15x10 rockcrawler streetlocks. 488 yukons by ZUK, detroit rear and true-trac front. 2 1/4" cat-back exhaust. Redline gear oil. Rear bumper by bentup.com.
|
|
|
Re: Help with rear shackle install please!!
[Re: Ben894x4]
#715859
04/15/06 06:40 PM
|
Joined: Sep 2004
Posts: 270
Mudrunner
|
I replaced my fronts which came with new bolts but I believe the stockers have the bolts as part of one side of the shackle. I thought it was weird at the time but didn't think too much about it because I was replacing them with new. <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
Re: Help with rear shackle install please!!
[Re: Ben894x4]
#715860
04/15/06 07:47 PM
|
Joined: Dec 2003
Posts: 14
OP
Need a Spot
|
I guess I'll just cut the damn things off... might have to burn the bushings out though even if I get the shackles off. Every project always takes twice as long and ends up costing 3 times as much as expected, doesn't it!! Wouldn't be exciting if it didn't, I suppose. Thanks again.
89 xcab 4x4 22re. 1.5" BJ spacers, 3" shackle and AAL + fender trim. 33x12.5 R15 MT/Rs, 15x10 rockcrawler streetlocks. 488 yukons by ZUK, detroit rear and true-trac front. 2 1/4" cat-back exhaust. Redline gear oil. Rear bumper by bentup.com.
|
|
|
Re: Help with rear shackle install please!!
[Re: Ben894x4]
#715861
04/15/06 11:28 PM
|
Joined: Dec 2000
Posts: 882
Rock Warrior
|
if you have one side off ream them out with a 1/4 drill bit.. the bushings that is
|
|
|
Re: Help with rear shackle install please!!
[Re: missouriman]
#715862
04/15/06 11:55 PM
|
|
Anonymous
Unregistered
|
MAPP gas and torch those puppies. Actually a 1/4 drill bit should help ream them out.
|
|
|
Re: Help with rear shackle install please!!
#715863
04/16/06 01:29 AM
|
Joined: Dec 2003
Posts: 14
OP
Need a Spot
|
Thanks for the tips. I tried using a puller to force the bolt through, but that was a no go so ended up just cutting the bolts and removing the entire leaf pack. I'll take it to a spring shop nearby on monday and have them press out the old bushings. There probably is a simper way but I was struggling and hate making no progress. Oh well, the end result will be worth it. Thanks again!
89 xcab 4x4 22re. 1.5" BJ spacers, 3" shackle and AAL + fender trim. 33x12.5 R15 MT/Rs, 15x10 rockcrawler streetlocks. 488 yukons by ZUK, detroit rear and true-trac front. 2 1/4" cat-back exhaust. Redline gear oil. Rear bumper by bentup.com.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6066 MB (Peak: 0.6761 MB) Data Comp: Off Server Time: 2026-06-10 19:04:48 UTCValid HTML 5 and Valid CSS 