Oversize bearing-C223T

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Oversize bearing-C223T #716393 04/17/06 12:16 PM

Joined: Jan 2006

Posts: 33

Australia

Viking_t

Getting the Wheeling Fever

Hi All,

My C223T engine is loosing compression, I just removed and stipped the engine aprt today. I saw the number on the back of the conrod bearing is .75, Does anyone know what is the maximum size of oversize bearing for this engine or I have to replace the crankshaft?

Thanks Heaps

Entire Thread
Subject	Posted By	Posted
Oversize bearing-C223T	Viking_t	04/17/06 12:16 PM
Re: Oversize bearing-C223T	JLEMOND	04/18/06 12:33 AM
Re: Oversize bearing-C223T	Viking_t	04/18/06 12:43 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.505s Queries: 15 (3.503s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-19 09:31:34 UTC
Valid HTML 5 and Valid CSS