Do I need to reseat the distributor?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Do I need to reseat the distributor? [Re: parshal] #717353 04/20/06 04:15 AM

Anonymous

Unregistered

What I found is that when you have #1 set to TDC Compression Stroke, put the distributer in with the rotor right at the 12:00 Oclock position. It will rotate CCW to the #1 plug wire position as it goes in. Worked right off when I did it that way.

Good Luck!

Entire Thread
Subject	Posted By	Posted
Do I need to reseat the distributor?	parshal	04/20/06 03:57 AM
Re: Do I need to reseat the distributor?	Anonymous	04/20/06 04:08 AM
Re: Do I need to reseat the distributor?	Anonymous	04/20/06 04:15 AM
Re: Do I need to reseat the distributor?	missouriman	04/20/06 04:28 AM
Re: Do I need to reseat the distributor?	parshal	04/21/06 12:39 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.467s Queries: 16 (3.465s) Memory: 0.5977 MB (Peak: 0.6307 MB) Data Comp: Off Server Time: 2026-06-17 07:00:19 UTC
Valid HTML 5 and Valid CSS