I'm currently running the ever loved mass produced springs from pro-comp <img src="/forums/images/graemlins/shiner.gif" alt="" />.

Have decided not to go with a buggy leaf set up, reason being this is still my dd, the trails i get to ride have many steap hill climbs and decents so i'm concerned about unloading problems. I've read there's a way to do it, the right way <img src="/forums/images/graemlins/lol.gif" alt="" />, so that you don't run into this problem, but i'd like too keep my rear stock hangers just in-case something doesn't work out right, and a buggy set up would require these to be removed.

I'm planning on going with 63" chevys, all-pro jonny joints 4" back from the stock location and 6" shackles. Along with this i'd like to remove the front torque arm & bracket and put it onto the rear with the arm cut and extended to the crossmember to act as a traction bar.

Would like to get feedback on this plan before I order anything...have been going back and forth on how to set up the rear end of these springs and have settled on this for now.

Any thoughts will be appreciated.

Thanks <img src="/forums/images/graemlins/cheers.gif" alt="" />