tie rod flip

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

tie rod flip #719043 04/26/06 08:29 AM

Joined: Mar 2000

Posts: 129

Phoenix, AZ

steven c

Wheeler

Just did a torsion bar lift, using Darlington diff drop brackets on my 94 amigo. Noticed slight bump steer with this set up. I suspect because the tie rod angle is no longer parallel to the ground. I was wondering if it would be possible to flip the tie rods from under the steering knuckles to the top using a kit similair to the one found on:

www.rock-equipment.com

Any Input?

Thanks

Entire Thread
Subject	Posted By	Posted
tie rod flip	steven c	04/26/06 08:29 AM
Re: tie rod flip	Rodeo Guy	04/26/06 08:53 AM
Re: tie rod flip	strawmyers	04/26/06 12:48 PM
Re: tie rod flip	CPOM	04/27/06 06:45 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.529s Queries: 15 (3.526s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-22 23:54:14 UTC
Valid HTML 5 and Valid CSS