tie rod flip

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: tie rod flip [Re: strawmyers] #719046 04/27/06 06:45 PM

Joined: Oct 2002

Posts: 2,285

Boston (roslindale)

CPOM

Body Damage is Cool

In IFS, the mounting point is taken into consideration to keep you from steering when the wheel moves. Moving the TRE to a different spot will change that geometry.

This is not an issue in a solid axle as the TRE doesn't pivot relative to the axle/wheel.

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender

Entire Thread
Subject	Posted By	Posted
tie rod flip	steven c	04/26/06 08:29 AM
Re: tie rod flip	Rodeo Guy	04/26/06 08:53 AM
Re: tie rod flip	strawmyers	04/26/06 12:48 PM
Re: tie rod flip	CPOM	04/27/06 06:45 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.433s Queries: 16 (3.505s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-23 01:15:37 UTC
Valid HTML 5 and Valid CSS