Sammy questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Sammy questions #719826 04/30/06 04:30 AM

Joined: Apr 2006

Posts: 19

cornettsville ky

goblin79

Need a Spot

OK here's what i got i got a Sammy body an frame really cheap Ive got a d25for the front an a d44 for the rear both with 5.88 gears what i need to no is can i make a jeep 258 i6 fit into a Sammy i was wanting to use the motor an tranny an t case the axles are out of a 54 cj3b an the motor tranny an t case is out of a 79 cj5 I'm going to stretch the frame also thx for the help

1988, Dodge Raider, 2.6 5 speed, 4x4, 33in interco ltbs

Entire Thread
Subject	Posted By	Posted
Sammy questions	goblin79	04/30/06 04:30 AM
Re: Sammy questions	Billjohn	05/01/06 07:30 PM
Re: Sammy questions	blevcom21	05/02/06 04:03 AM
Re: Sammy questions	goblin79	05/03/06 05:13 AM
Re: Sammy questions	blevcom21	05/03/06 11:37 AM
Re: Sammy questions	goblin79	05/03/06 06:03 PM

Moderated by 4x4Wire, code33

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.583s Queries: 15 (3.551s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-06-20 08:59:13 UTC
Valid HTML 5 and Valid CSS