1998 Amigo diesel conversion

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1998 Amigo diesel conversion #720340 05/02/06 08:00 AM

Anonymous

Unregistered

That occurred to me just after I posted it. What does the 2.8 weigh? Would I have to rebuild the front end? Do you know if there is a way to bolt it to my existing drive train? Thanks for the info already supplied and the info forthcoming. BTW, do you know what the difference is between the 'T' and the 'TB-a' if any?

Entire Thread
Subject	Posted By	Posted
1998 Amigo diesel conversion	Anonymous	05/02/06 03:52 AM
Re: 1998 Amigo diesel conversion	Anonymous	05/02/06 04:16 AM
Re: 1998 Amigo diesel conversion	Anonymous	05/02/06 04:36 AM
Re: 1998 Amigo diesel conversion	Anonymous	05/02/06 05:05 AM
Re: 1998 Amigo diesel conversion	Anonymous	05/02/06 08:00 AM
Re: 1998 Amigo diesel conversion	Anonymous	05/02/06 09:34 PM
Re: 1998 Amigo diesel conversion	acy76	05/02/06 10:47 PM
Re: 1998 Amigo diesel conversion	Tdamigo	05/03/06 12:25 AM
Re: 1998 Amigo diesel conversion	jcouchster	07/10/06 05:16 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.522s Queries: 15 (3.519s) Memory: 0.6076 MB (Peak: 0.6406 MB) Data Comp: Off Server Time: 2026-07-16 14:47:44 UTC
Valid HTML 5 and Valid CSS