Kablammo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Kablammo [Re: vanduker] #721683 05/11/06 03:19 AM

Joined: Aug 2005

Posts: 91

MountaineerIsuzu1 Offline

Getting the Wheeling Fever

driver side head is off, bolt sheared about an inch and a half down in the hole. I have to drill the center out of the bolt and put the easy out into it. Hopefully that pulls it, otherwise i am going to try and drill it out to the point I dont mess up the threads and clean out the crud. If that doesnt work then i am going to drill it all out and helicoil it.

Entire Thread
Subject	Posted By	Posted
Kablammo	MountaineerIsuzu1	05/08/06 12:46 AM
Re: Kablammo	anubis	05/08/06 01:35 PM
Re: Kablammo	mrjingstr71	05/10/06 06:50 AM
Re: Kablammo	anubis	05/10/06 12:02 PM
Re: Kablammo	MountaineerIsuzu1	05/11/06 01:52 AM
Re: Kablammo	vanduker	05/11/06 03:05 AM
Re: Kablammo	MountaineerIsuzu1	05/11/06 03:19 AM
Re: Kablammo	mlclark	05/11/06 04:16 AM
Re: Kablammo	vanduker	05/11/06 06:12 AM
Re: Kablammo	mlclark	05/11/06 07:02 AM
Re: Kablammo	vanduker	05/11/06 06:00 PM
Re: Kablammo	MountaineerIsuzu1	05/12/06 12:45 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.702s Queries: 16 (4.700s) Memory: 0.6177 MB (Peak: 0.6507 MB) Data Comp: Off Server Time: 2026-07-16 01:46:15 UTC
Valid HTML 5 and Valid CSS