Code 0300 - Misfiring, could it be timing belt?

Print Thread

Rate Thread

Re: Code 0300 - Misfiring, could it be timing belt? [Re: BobDole] #722246 05/11/06 05:37 PM

Joined: Apr 2001

Posts: 777

SLC, UT.

Jonesy

Rock Warrior

Is that BG44K available at any parts store? I would like to give this a shot before Moab.

I will probably change out the plugs...it hasn't been done for 3 years of so. That will probably have to wait until after Moab.

'97 Rodeo
3.2L V6
DOR 3" lift, 3"BL, DOR Boulder Bars, Tera-Low's, 33x10.5,Surco Safari Rack, Cobra CB, Rancho 9000's....andnNow with Half-Doors for the summer

Entire Thread
Subject	Posted By	Posted
Code 0300 - Misfiring, could it be timing belt?	Jonesy	05/09/06 08:22 PM
Re: Code 0300 - Misfiring, could it be timing belt?	mlclark	05/09/06 08:39 PM
Re: Code 0300 - Misfiring, could it be timing belt?	BobDole	05/10/06 03:16 AM
Re: Code 0300 - Misfiring, could it be timing belt?	Jonesy	05/10/06 04:44 PM
Re: Code 0300 - Misfiring, could it be timing belt?	anubis	05/10/06 06:14 PM
Re: Code 0300 - Misfiring, could it be timing belt?	BobDole	05/11/06 03:27 PM
Re: Code 0300 - Misfiring, could it be timing belt?	JLEMOND	05/11/06 04:01 PM
Re: Code 0300 - Misfiring, could it be timing belt?	Bigpoppax2	05/11/06 04:44 PM
Re: Code 0300 - Misfiring, could it be timing belt?	JLEMOND	05/12/06 03:25 AM
Re: Code 0300 - Misfiring, could it be timing belt?	Jonesy	05/11/06 05:37 PM
Re: Code 0300 - Misfiring, could it be timing belt?	BobDole	05/12/06 01:12 AM
Re: Code 0300 - Misfiring, could it be timing belt?	Jonesy	05/12/06 10:03 PM
Re: Code 0300 - Misfiring, could it be timing belt?	JLEMOND	05/13/06 12:24 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: