Can someone with a 1st gen Trooper do me a favour??

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Can someone with a 1st gen Trooper do me a favour?? [Re: barak] #722892 05/12/06 11:29 PM

Joined: Dec 2000

Posts: 186

Harriman TN USA

Mike Bridges Offline

Wheeler

Yes inside the frame rail by the body mounts the cross brace that runs from side to side. I measured about the middle of the tank to body floor the 1/2inch was at the bottom of the cross brace to tank. Your welcome anytime

Entire Thread
Subject	Posted By	Posted
Can someone with a 1st gen Trooper do me a favour??	barak	05/12/06 01:38 AM
Re: Can someone with a 1st gen Trooper do me a favour??	Mike Bridges	05/12/06 01:29 PM
Re: Can someone with a 1st gen Trooper do me a favour??	barak	05/12/06 08:40 PM
Re: Can someone with a 1st gen Trooper do me a favour??	Mike Bridges	05/12/06 11:29 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.845s Queries: 16 (3.843s) Memory: 0.5990 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-12 01:41:42 UTC
Valid HTML 5 and Valid CSS