Adjusting idle procedure?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Adjusting idle procedure? [Re: Jeffstoyo] #723019 05/12/06 08:24 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Cold idle is primarily controlled by the big air valve down below the throttle body on the early engines. Make sure that part is all working correctly. Or swap to a later style throttle body with the integrated air bypass valve.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Adjusting idle procedure?	Jeffstoyo	05/12/06 08:14 PM
Re: Adjusting idle procedure?	4Crawler	05/12/06 08:24 PM
Re: Adjusting idle procedure?	Jeffstoyo	05/13/06 04:29 AM
Re: Adjusting idle procedure?	4Crawler	05/23/06 04:24 AM
Re: Adjusting idle procedure?	Scotty_Gotti	05/23/06 08:55 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.460s Queries: 16 (3.458s) Memory: 0.6008 MB (Peak: 0.6338 MB) Data Comp: Off Server Time: 2026-06-16 15:02:31 UTC
Valid HTML 5 and Valid CSS