I have tried to get the PCV valve out on my truck and it is turning out to be a PITA. That thing is in there good and there is not much room under the intake manifold to pry it out. I pried a little by getting a screwdriver under the rubber grommet but I just broke the lip off the grommet. I decided to walk away and take a minute before I get that thing stuck in there and have to start pulling the intake off. Anybody have any experience/knoledge to help me out a little?

Theresa the Toyota Terror-89 Toyota P/U (3.0L SR5, 5sp swapped in from auto, 3"B.L., 32X11.5X15 MT/R, 2.5" stainless magnaflow catback exhaust, leaky floor with cold draft @feet, FUBAR comptron now in glovebox)