3VZE PCV valve replacement

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3VZE PCV valve replacement #723025 05/13/06 12:19 AM

Joined: Apr 2000

Posts: 4,230

Roseville, CA, Gateway to the ...

OOP'S

Roll Me Over

I would use silicone spray instead of WD-40. They are a real bummer to get out and it sounds like to me if the grommet is that brittle it to should be replaced.

David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA

"Serenity through Sobriety"

Entire Thread
Subject	Posted By	Posted
3VZE PCV valve replacement	10_35lookoutbelow	05/12/06 08:50 PM
Re: 3VZE PCV valve replacement	Anonymous	05/12/06 09:55 PM
Re: 3VZE PCV valve replacement	OOP'S	05/13/06 12:19 AM
Re: 3VZE PCV valve replacement	Myredyota	05/13/06 08:12 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.031s Queries: 15 (4.028s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-11-02 06:01:02 UTC
Valid HTML 5 and Valid CSS