232 or 258ci in a 1978 CJ7?

Print Thread

Rate Thread

Re: 232 or 258ci in a 1978 CJ7? [Re: JeePete] #723511 05/28/06 03:40 AM

Joined: Oct 2003

Posts: 72

burtv

Getting the Wheeling Fever

Where are the casting numbers located on the engine? I have looked but can't find it. Probably was right in front of me!

78 CJ7, 83 wide track axles/Dana 30 Front W/ OX Locker, Model 20 rear w/ one piece shafts(welded tubes)/Detroit Locker, 4.10 gears. 4.5" spring lift with 3/4" shackle lift. 35x12.50 BFG MT, 4.2L, Weber Carb, K&N, T18,Scout Dana 300,Warn 9.5ti

Entire Thread
Subject	Posted By	Posted
232 or 258ci in a 1978 CJ7?	burtv	05/15/06 03:10 AM
Re: 232 or 258ci in a 1978 CJ7?	BigJim	05/15/06 03:39 AM
Re: 232 or 258ci in a 1978 CJ7?	burtv	05/15/06 03:50 AM
Re: 232 or 258ci in a 1978 CJ7?	JeePete	05/15/06 04:06 AM
Re: 232 or 258ci in a 1978 CJ7?	burtv	05/15/06 05:00 AM
Re: 232 or 258ci in a 1978 CJ7?	JeePete	05/15/06 07:10 AM
Re: 232 or 258ci in a 1978 CJ7?	burtv	05/16/06 01:44 AM
Re: 232 or 258ci in a 1978 CJ7?	JeePete	05/16/06 02:54 AM
Re: 232 or 258ci in a 1978 CJ7?	burtv	05/16/06 04:27 AM
Re: 232 or 258ci in a 1978 CJ7?	JeePete	05/16/06 03:42 PM
Re: 232 or 258ci in a 1978 CJ7?	sroyfire	05/22/06 04:09 AM
Re: 232 or 258ci in a 1978 CJ7?	JeePete	05/22/06 06:05 AM
Re: 232 or 258ci in a 1978 CJ7?	sroyfire	05/24/06 05:35 AM
Re: 232 or 258ci in a 1978 CJ7?	burtv	05/28/06 03:40 AM
Re: 232 or 258ci in a 1978 CJ7?	JeePete	05/28/06 05:27 AM
Re: 232 or 258ci in a 1978 CJ7?	JeePete	05/28/06 02:56 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social: