With a good bit of help from Tad (Nazrat), I got most of the work done removing the transmission. The only thing left is 6 bellhousing bolts. I'll be replacing it with a freshly rebuilt 700R4 :knocks on wood:. Is there anything I should take care of on the engine while I have the trans pulled?

The engine is a SOHC with about 150k, and there seems to be a lot of oil on the trans housing, and the back of the engine. I'm going to clean everything up and see if I can locate a source, but I haven't had any real oil usage problems in the past.

I only want to do this once

Thanks,
<img src="/forums/images/graemlins/cheers.gif" alt="" />Andre