Sheared upper rear shock bolts.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Sheared upper rear shock bolts. [Re: no_hank] #723769 05/23/06 03:55 AM

Anonymous

Unregistered

You need to compress the suspension ALL the way (articulating will work) then measure eye to eye, then top it out and measure eye to eye. The right way to do it is to remove the coil and measure and add straps limiting straps. But... that can be a lot of work.

Entire Thread
Subject	Posted By	Posted
Sheared upper rear shock bolts.	no_hank	05/16/06 04:35 AM
Re: Sheared upper rear shock bolts.	no_hank	05/16/06 03:45 PM
Re: Sheared upper rear shock bolts.	BigJim	05/16/06 10:40 PM
Re: Sheared upper rear shock bolts.	cuervo25	05/16/06 10:42 PM
Re: Sheared upper rear shock bolts.	BobRowe	05/17/06 04:58 AM
Re: Sheared upper rear shock bolts.	Anonymous	05/17/06 06:02 AM
Re: Sheared upper rear shock bolts.	no_hank	05/23/06 02:04 AM
Re: Sheared upper rear shock bolts.	Anonymous	05/23/06 03:55 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.605s Queries: 16 (3.603s) Memory: 0.6046 MB (Peak: 0.6375 MB) Data Comp: Off Server Time: 2026-06-17 17:56:01 UTC
Valid HTML 5 and Valid CSS