This is a redo thanks to the hackers

A folow up to
Noise dampening with roofing materials

I installed peel n seal the other day




Got it a LOWES for under 15 dolla for a roll of 6" BY 25'
It's got a foil face and an asphalt type sticking surface




It was about 90 degrees when I did the flooring. It's super sticky! I recomend gloves, a fresh razor and some cleaning solution. I used acetone.




I have all the carpet and insultion already srtipped out of the truck from previous incidents. Puled the seats and amps, washed with hose and then wiped down with the acetone.





Super easy to apply. Just peel the release backing set in place and press down. The slippery of the gloves really helped this part.
Have to make sure it's dry and dust and dirt free too.



Just wanted to get under everything cuz the rest will be easy.





I've noticed that it really helped and I can also tell where I need the rest to be placed.
The rear of the truck, all the way back, is really noisy now in comparison. That is also stripped of insulation but has the rubber mat over it.

It has also helped with the heat the comes up from the driveshft hump on the hot days. It still is warm but a layer of padding plus the carpet should insulate that and put an end to that. I have the old carpet kit that I can take in and out.



These are the specs from the package