Still nothing else to do, so I decided to get an idea of how much volume is in the intake runners. I had estimated a little less than 60 cid, but wasn't sure how much I was off... so.... cut the mock plenum for runners, sealed the exposed wood edges with epoxy, installed some injectors and the fuel rail in an extra lower intake, sealed the bottom of the runners with duct tape, flanges with RTV..... and filled the runners with water:
[Linked Image]
[Linked Image]

900ml - or - 54.92 cid.... call it 55.0 cid.

I'll need at least 37.0 cid displacement in the plenum box.... that's no problem as I'll probably have a bit more.

Frank

Last edited by FrankR; 06/04/06 08:19 PM.
'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum