Since the fresh air inlet is moving to the driver side, the mounting brackets must be removed from the air filter housing in order to relocate it to the driver side. The spot welds were drilled with a spot weld bit. The drain hole at the lower right will be plugged and another drilled for drainage on the other side of the housing:
[Linked Image]
[Linked Image]
New mounts will now have to be made to fit the driver side inner fender.

Frank

'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum