This part is slow going...... removed the OE hose barbs from the throttle body, drilled and tapped for 1/4" pipe thread:
[Linked Image]
Installed new fittings and the throttle body is now plumbed like so:
[Linked Image]
Hooked up the IAC coolant plumbing, installed the coil and finished the wiring for the IAC and TPS:
[Linked Image]
[Linked Image]

Next session I'll wire the tach and ignition circuit. At times today I thought I was backing up more than going forward...... 10 hours on this little bit o' work. <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

Frank

'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum