I'd be thrilled if they'll work. If they're identical to the 3000GT SOHC rails, they won't work... the injector bung angle and mounting tab angle/spacing is different due to a different lower intake design.

1) The truck lower intake rail mounts are level at the mounting point, the 3000GT rails are at a "V" angle.

2) The truck rails have the injector bungs offset to the engine C/L to allow the rails to clear the intake runners, the 3000GT rails set the bungs about even with the inside edge of the rail tube.

3) The mounting hole spacing on the truck rails is ~ 8.500", the 3000GT rail measures ~8.375".

I'll send my email address in the PM reply and keep my fingers crossed.

Thanks! <img src="/forums/images/graemlins/kewl.gif" alt="" />

Frank