I got a package of 1/2W resistors from RadioShack that includes some 470 ohm resistors, so I'll use one of those - that's within the tolerance range and shouldn't cut the voltage enough to matter.

I have TACHSELECT jumpered to OPTOIN as outlined in step 52 (for the Hall sensor, optical sensor, coil negative terminal or points). So, I should remove this jumper connection from OPTOIN and connect the removed end of the jumper to XG1?

AND, I should remove the jumper from XG1 to XG2, right?

Frank

Last edited by FrankR; 12/15/07 07:15 PM.
'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum