frozen ball joints

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: frozen ball joints [Re: wizardz] #727880 05/30/06 11:44 PM

Joined: Nov 2003

Posts: 378

New York

NYT100

Mudrunner

Put the puller on, tighten it, then hit the steering knuckle with a sledge hammer. There is a flat spot on the knuckle where you should hit. They will come out after a few whacks.

97 T100, 32" BFG/AT, Warn hubs, stock height with Bilstein shocks, Optima battery

Entire Thread
Subject	Posted By	Posted
frozen ball joints	wizardz	05/30/06 02:40 PM
Re: frozen ball joints	4xGeek	05/30/06 10:28 PM
Re: frozen ball joints	wizardz	05/31/06 02:07 AM
Re: frozen ball joints	kewlynx	05/31/06 08:06 AM
Re: frozen ball joints	adam	05/31/06 06:23 PM
Re: frozen ball joints	4xGeek	05/31/06 07:46 PM
Re: frozen ball joints	wizardz	06/01/06 03:13 AM
Re: frozen ball joints	NYT100	05/30/06 11:44 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.492s Queries: 16 (3.442s) Memory: 0.6072 MB (Peak: 0.6401 MB) Data Comp: Off Server Time: 2026-06-02 14:13:57 UTC
Valid HTML 5 and Valid CSS