frozen ball joints

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: frozen ball joints [Re: 4xGeek] #727881 05/31/06 02:07 AM

Joined: May 2004

Posts: 82

Pittsburgh, PA

wizardz

Getting the Wheeling Fever

I probably spent 10 min total using the pickle fork, over the past 3 days. That said, I've been using only a framing hammer.

I'll try both of your suggestions. Thanks!

<img src="/forums/images/graemlins/evil.gif" alt="" />

*95 T100, 4WD, EXTCAB, SR5, 5spd, 2.5 mm bored throttle body, Kumho Venture MT, Bilstein HD, TRD SC, URD Performance Upgrade Kit, 2" body lift, TRD headers coming soon
*06 Toyota Rav4 269HP 4wd V6

Amsoil in all

Entire Thread
Subject	Posted By	Posted
frozen ball joints	wizardz	05/30/06 02:40 PM
Re: frozen ball joints	4xGeek	05/30/06 10:28 PM
Re: frozen ball joints	wizardz	05/31/06 02:07 AM
Re: frozen ball joints	kewlynx	05/31/06 08:06 AM
Re: frozen ball joints	adam	05/31/06 06:23 PM
Re: frozen ball joints	4xGeek	05/31/06 07:46 PM
Re: frozen ball joints	wizardz	06/01/06 03:13 AM
Re: frozen ball joints	NYT100	05/30/06 11:44 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.995s Queries: 16 (3.993s) Memory: 0.6084 MB (Peak: 0.6414 MB) Data Comp: Off Server Time: 2026-06-06 19:23:36 UTC
Valid HTML 5 and Valid CSS