I'll agree with Bansil on that one. I had a Nissan that I did a BL on and luckily, the lift came with the radator drop bracket. I never had any problems with overheating.

The bracket itself was pretty simple, but cutting the old one off was a pain, so a lot of people didn't do it and just removed the fan shroud - they overheated a lot.

If your fan isn't in a shroud, then it isn't pulling air across the radiator. It takes the "easiest route" which is AROUND the radiator.

'99 Isuzu Amigo S, 3.2L 4x4 softtop, 3" Calmini Lift, Indy4x Custom Bumpers & Sliders