3rd Generation 4 runner Lift

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3rd Generation 4 runner Lift [Re: TRDatVT] #728182 06/04/06 03:35 AM

Joined: May 2006

Posts: 26

Blacksburg, VA

TRDatVT

Getting the Wheeling Fever

Ok I have revised my question a little more... I am trying to fit 33 x 12.50 mud terrains without rubbing... no serious axle flex room needed. What is the easiest, cheapest route for now since i still have engine work to do <img src="/forums/images/graemlins/kewl.gif" alt="" />

1999 4-runner
TRD Supercharger, 5 speed, 2 inch pulley, Dual 2.5" exhaust, AEM Brute Force Intake, Supra Injectors

Entire Thread
Subject	Posted By	Posted
3rd Generation 4 runner Lift	TRDatVT	06/01/06 02:23 AM
Re: 3rd Generation 4 runner Lift	BoostedInline6	06/01/06 04:06 PM
Re: 3rd Generation 4 runner Lift	kewlynx	06/02/06 01:22 AM
Re: 3rd Generation 4 runner Lift	larsdennert	06/02/06 02:04 AM
Re: 3rd Generation 4 runner Lift	TRDatVT	06/04/06 03:35 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.895s Queries: 16 (3.893s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-06-10 17:33:21 UTC
Valid HTML 5 and Valid CSS