|
|
|
|
cruise control problem!
#728229
06/01/06 04:49 AM
|
Joined: Aug 2004
Posts: 56
OP
Getting the Wheeling Fever
|
Hey guys I need some help to figure out my cruise control problem.
As some of you know I did the 2001 eng./dash swap on my 92 amigo, well everything seems to work fine except for the cruise control. I read the owner's manual and I followed the instructions to set the cruise but it just doesn't want to engage. When I press the main switch to "ON" the light turns on but when I press the "SET/COAST" the "CRUISE SET" light on the inst. cluster it doesn't turn on.
I also noticed that when I first start my truck the "CRUISE SET" light comes on no more then 3 sec. just like the CEL, ABS, etc.. I thought it was kind of odd since the "SET/COAST" button is next to the WINDSHIELD WIPER/WASHER and the wipers work great, even the "INT"
Today I checked the fuse box to see if there was a blown fuse for the cruise but I didnt see a fuse for it. Any ideas? What should I do next?
Thanks Sal.
~1992 Isuzu Amigo 4x4~ * 3.2L DOCH V6 * 01 Rodeo Dash-board swap * 32's * custom roof rack * custom exhaust
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 14 (0.006s) Memory: 0.5801 MB (Peak: 0.6199 MB) Data Comp: Off Server Time: 2026-07-13 17:43:49 UTCValid HTML 5 and Valid CSS