Formula for final compression ratio

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Formula for final compression ratio [Re: FrankR] #728289 06/01/06 08:06 PM

Joined: Aug 2004

Posts: 644

N.J.

conner

Rock Warrior

Thanks Frank: I had seen that and used it. However i am not convinced of its accuracy. thats why i want the formula to work out myself.

Over the hill but still climbing.
88 Montero 2.6L auto, manual hubs, cooling fan conversion gps,recurved distributor,LSD Diff.

Entire Thread
Subject	Posted By	Posted
Formula for final compression ratio	conner	06/01/06 06:07 PM
Re: Formula for final compression ratio	DirtyOldTown	06/01/06 06:36 PM
Re: Formula for final compression ratio	FrankR	06/01/06 06:44 PM
Re: Formula for final compression ratio	conner	06/01/06 08:06 PM
Re: Formula for final compression ratio	FrankR	06/01/06 11:30 PM
Re: Formula for final compression ratio	conner	06/02/06 12:47 PM
Re: Formula for final compression ratio	FrankR	06/02/06 01:52 PM
Re: Formula for final compression ratio	conner	06/01/06 08:09 PM
Re: Formula for final compression ratio	DirtyOldTown	06/01/06 08:33 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.462s Queries: 16 (3.460s) Memory: 0.6087 MB (Peak: 0.6417 MB) Data Comp: Off Server Time: 2026-06-18 23:34:46 UTC
Valid HTML 5 and Valid CSS