Long story short: I'm putting a JDM Toyota diesel into my '92. I had to get a flywheel from Australia. Everything I've read and heard, from very reliable sources, confirms that any standard 22r(e) clutch kit will work with the flywheel I got. Problem is, I've gotten two different clutch kits from my local Napa and neither pressure plate fits my flywheel. One was too large, the other too small. Each time, the holes in the pressure plate ALMOST lined up with the dowels in the flywheel, but were off by maybe 1/8" or so.

If anyone has a 22r flywheel sitting around, can you do me a huge favor and measure the center-to-center distance between any of the three dowel pins on the flywheel? Mine measure out at about 9.25".

Thanks.