Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
U bolt size for 2wd #728974 06/05/06 01:43 AM
Joined: Dec 2002
Posts: 90
Vonka Offline OP
Getting the Wheeling Fever
I have a lowered truck that I want it to be stock height.What's would be the size of the ubolt for the rear of a 1990 2wd PU truck?


88 4x4 22re
86 2wd 1-ton 22re
91 2wd 22re
Re: U bolt size for 2wd [Re: Vonka] #728975 06/05/06 01:54 AM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
Don't know the size off-hand, but see if the u-bolts you have are made with extra threads (assuming the truck was lowered with blocks - X" of extra thread for an X" block). Then just re-use the bolts and cut them shorter as needed. Or measure what is on there now:

[Linked Image]

and subtract the block height from the measured "L" dimension.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5883 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-07 08:10:31 UTC
Valid HTML 5 and Valid CSS