U bolt size for 2wd

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: U bolt size for 2wd [Re: Vonka] #728975 06/05/06 01:54 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Don't know the size off-hand, but see if the u-bolts you have are made with extra threads (assuming the truck was lowered with blocks - X" of extra thread for an X" block). Then just re-use the bolts and cut them shorter as needed. Or measure what is on there now:

[Linked Image]

and subtract the block height from the measured "L" dimension.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
U bolt size for 2wd	Vonka	06/05/06 01:43 AM
Re: U bolt size for 2wd	4Crawler	06/05/06 01:54 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.508s Queries: 16 (3.506s) Memory: 0.5959 MB (Peak: 0.6288 MB) Data Comp: Off Server Time: 2026-06-13 04:10:57 UTC
Valid HTML 5 and Valid CSS