|
|
|
|
 pulled a Code P 0306
#729150
06/05/06 09:28 PM
|
Joined: Jul 2000
Posts: 782
OP
Rock Warrior
|
Went to AutoZone today to see what was causing the CEL light to be on. Their code reader said it was
P0306-- Misfire in the no 6 cylinder. So what to do now??
Alittle history on this 97 Rodeo. Just put 2 used, but cleaned and checked Heads on it. New Timing Belt, New spark plugs.
Could it be as simple as the hookup to the coil pack not working quite right? What are things to look for?
TIA
|
|
|
Re: pulled a Code P 0306
[Re: Rodeofox]
#729151
06/05/06 09:51 PM
|
|
Anonymous
Unregistered
|
I?ll go for the hookup to the coil pack, check the simple thing, some cracks in the spark plug cable and the spark plug itself.
|
|
|
Re: pulled a Code P 0306
#729152
06/07/06 04:59 PM
|
Joined: Jul 2000
Posts: 782
OP
Rock Warrior
|
Everything checks out okay. Could it be that the timing isnt perfect and thats whats causing the miss? I ask because the second time i did the timing belt due to a leaky water pump I recall not being able to get the drivers side cam to line up 100% with the timing notches?
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.006s) Memory: 0.5896 MB (Peak: 0.6434 MB) Data Comp: Off Server Time: 2026-07-13 04:52:12 UTCValid HTML 5 and Valid CSS