pulled a Code P 0306

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

pulled a Code P 0306 #729150 06/05/06 09:28 PM

Joined: Jul 2000

Posts: 782

Knoxville,TN

Rodeofox

Rock Warrior

Went to AutoZone today to see what was causing the CEL light to be on. Their code reader said it was
P0306-- Misfire in the no 6 cylinder. So what to do now??

Alittle history on this 97 Rodeo. Just put 2 used, but cleaned and checked Heads on it. New Timing Belt, New spark plugs.

Could it be as simple as the hookup to the coil pack not working quite right? What are things to look for?

TIA

Entire Thread
Subject	Posted By	Posted
pulled a Code P 0306	Rodeofox	06/05/06 09:28 PM
Re: pulled a Code P 0306	Anonymous	06/05/06 09:51 PM
Re: pulled a Code P 0306	Rodeofox	06/07/06 04:59 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.478s Queries: 15 (3.476s) Memory: 0.5948 MB (Peak: 0.6277 MB) Data Comp: Off Server Time: 2026-07-14 10:21:48 UTC
Valid HTML 5 and Valid CSS