Head bolt torque

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head bolt torque [Re: TobyB] #729984 06/12/06 12:56 PM

Joined: Aug 2004

Posts: 644

N.J.

conner

Rock Warrior

My advise would be to not loosen first. Just pull them down to specs. Especialy if its a perma-torque gasket.
Conner

Over the hill but still climbing.
88 Montero 2.6L auto, manual hubs, cooling fan conversion gps,recurved distributor,LSD Diff.

Entire Thread
Subject	Posted By	Posted
Head bolt torque	DirtyOldTown	06/09/06 02:35 PM
Re: Head bolt torque	FrankR	06/09/06 03:15 PM
Re: Head bolt torque	LRJ4x4	06/09/06 05:59 PM
Re: Head bolt torque	FrankR	06/10/06 03:44 AM
Re: Head bolt torque	TobyB	06/10/06 06:31 AM
Re: Head bolt torque	conner	06/12/06 12:56 PM
Re: Head bolt torque	DirtyOldTown	06/13/06 05:55 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.570s Queries: 16 (3.567s) Memory: 0.6034 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-06-15 16:40:46 UTC
Valid HTML 5 and Valid CSS